Dodatne informacije

• Lični podaci

• Datum rođenja: 20. septembar 1965.
• Mesto rođenja: Niš

• Obrazovanje

• Fakultet: Mašinski fakultet u Nišu
• Odsek / Grupa / Smer: Proizvodno mašnstvo
• Godina diplomiranja: 1991.

• Spisak publikacija

• Monografije i poglavlja u monografijama:

  Jelna Baralić, Bogdan Nedić, Miroslav Radovanović, Predrag Janković. Obradivost materijala rezanjem abrazivnim vodenim mlazom, Univerzitet u Kragujevcu, Fakultet inženjerskih nauka, nacionalnla monografija 2015.

• Knjige i udžbenici:

  Miloš Milovančević, Predrag Janković, Jelena Stefanović marinović. Ispitivanje mašinskih konstrukcija, Univerzitet u Nišu, Mašinski fakultet, 2015.

  
  

  Janković P., Madić M.: Osnove metrologije i analiza mernih sistema, Univerzitet u Nišu, Mašinski fakultet, ISBN 978-86-6055-129-2 - univerzitetski udžbenik, 2020.

• Radovi u časopisima sa IMPACT faktorom:

  Marinković Velibor, Rančić Bojan, Janković Predrag, A Computer Assisted Process Design of Multi-Step Deep Drawing,  Journal for Theory and Application in Mechanical Engineering, Hrvatski strojarski i brodograđevni inženjerski savez, Vol.54, No.3, 2012, pp. 189-196

  
  

  V. Pešić, R. Đorđević, N. Shaban, P. Janković, D. Mišić, Influence of the afila gene on grain yield in pea (pisum sativum L), Bulg. J. Agric. Sci., Agricultural Academy, Sofia, Bularia, 19: 186-193

  
  

  P. Janković, M. Radovanović, J. Baralić, B. Nedić, Prediction model of surface roughness in abrasive water jet cutting of aluminium alloy, J BALK TRIBOL ASSOC, Vol. 19, No 4, 2013, pp. 585-595

  
  

  Ž. Ćojbašić, Dalibor Petković, Shahaboddin Shamshirband, Chong Wen Tong, Sudheer Ch, P. Jankoivć, Nedeljko Dučić, Jelana Baralić, Surface roughness prediction by extreme learning machine constructed with abrasive water jet, Precision Engineering: Journal of the International Societies for Precision Engineering and Nanotechnology, (2016), vol. 43 br. , pp. 86-92.

  
  

  V. Blagojević, P. Janković, Advantages of Restoring Energy in the Execution Part of Pneumatic System with Semi-Rotary Actuator, Thermal Science journal of  Society of Thermal Engineers of Serbia, (2016), vol. 20 br. , str. S1599-S1609

  
  

  D. Petković, M. Madić, M. Radovanović, P. Janković, G. Radenković, Modeling of Cutting Temperature in the Biomedical Stainless Steel Turning Process, Thermal Science journal of  Society of Thermal Engineers of Serbia, (2016), vol. 20 br. , pp. S1345-S1354

  
  

  Janković P., Pešić V., Rančić S., Radošević O., Environmental Issues of Modern Production Technologies, Journal of Environmental Protection and Ecology, 2017, Vol. 18, No 3, 1088-1099

  
  

  Janković P., Madić M., Petković D., Radovanović M., Analysis and modeling of the effects of process parameters on specific cutting energy in abrasive water jet cutting, Thermal Science, 2018, Vol. 22, Suppl. 5, pp. S1459-S1470

  
  

  Janković P., Madić M., Radovanović M., Petković D., Mladenović S., Optimization of Surface Roughness from Different Aspects in High-Power CO₂ Laser Cutting of AA5754 Aluminum Alloy, Arabian Journal for Science and Engineering 44 (12) 2019, 10245-10256

  
  

   

• Radovi u ostalim časopisima:

  P. Janković, Programiranje erozimata sa žicom - prenos podataka kod CAD-NC veze, Naučni podmladak br.3-4, 1991, str. 97-109

  
  

  D. Vukićević, P. Janković, Vlaknasti kompoziti kao gradivni materijali u mašinstvu, Časopis simod, Universitet u Nišu, Niš, 1995

  
  

  P. Janković, M. Maksić, D. Vukićević, Kompozitni materijali i njihova primena u mašinogradnji, časopis "IMK-14" Istraživanje i razvoj, Institut IMK “14. Oktobar”, Kruševac, broj 2, 1996, str. 31-36.

  
  

  J. Vukićević, P. Janković, Contribution to the discussion of the efficiency problem of the declared nominal number of the crank press duty cycles, Journal for technology of plasticity, No.1-2, Faculty of Technical Sciences-Institute for Production Engineering, Novi Sad, 1999, pp. 51-60.

  
  

  J. Milovanović, P. Janković, The boundary values of the punch diameter in the technology of the opening manufacture by puncing, “Facta Universitatis”, Vol. 1, No 7, Univerzitet u Nišu, Niš, 2000, str. 887-891

  
  

  B. Rančić, P. Janković, V. Marinković, Determing the transitional area of  square cups in oil hydraulic forming process, Journal for technology of plasticity, Vol. 31, Number 1-2,  Faculty of Technical Sciences-Institute for Production Engineering, Novi Sad, Serbia, 2006, pp. 45-55.

  
  

  M. Radovanović, P. Dašić, P. Janković, Experimental Determination of Cutting Force by Longitudinal Turning of C60E Steel, Journal of Modelling and Optimization in the Machines Building Fields – MOCM, Volume 2, Romanian Technical Sciences Academy and University of Bacau, MOCM-12 (2006), Bacau, Romania, 2006, pp. 113-119.

  
  

  V. Pesic, A. Klichevsky, P. Jankovic, Sustainable agricultural production from the standpoint of biodiversity, "Facta Universitatis", Series: Working and Living Environmental Protection, Vol. 3, No 1, UDC 631.95, University of Nis, Nis, 2006, pp. 83.-89.

  
  

  P. Janković, M. Radovanović, Correlation of cutting data by abrasive water jet, Annals of the Oradea University, Fascicle of Management and Technological Engineering, Volume VII (XVII), 2008, Universitatea din Oradea, Oradea, Romania, 2008, pp. 1528-1533.

  
  

  P. Janković, M. Radovanović, Water quality used by water jet machines, Annals of the Oradea University, Fascicle of Management and Technological Engineering, Volume VII (XVII), 2008, Universitatea din Oradea, Oradea, Romania, 2008, pp. 1534-1538.

  
  

  P. Janković, M. Radovanović, Kerf geometry by abrasive water jet cutting, Annals of the Oradea University, Fascicle of Management and Technological Engineering, Vol. VIII (XVIII),  Universitatea din Oradea, Oradea, Romania, 2009, pp.1191-1196.

  
  

  P. Janković, M. Radovanović, Prilog istraživanju kvaliteta reza kod sečenja abrazivnim vodenim mlazom, časopis "IMK-14" Istraživanje i razvoj, broj 8-9, Institut IMK “14. Oktobar”, Kruševac, 2009, str. 53-56.

  
  

  V. Pešić, P. Janković, D. Mrkalj, Zagađenje vazduha i održiva poljoprivreda, časopis "Ecologica", Naučno-stručno društvo za zaštitu životne sredine Srbije - Ecologica, Beograd, br. 53, god. 2009, str. 47-52.

  
  

  V. Pesic, A. Klichevsky, P. Jankovic, Biotechnology and sustainable agriculture, "Facta Universitatis", Series: Working and Living Environmental Protection, UDC 631.147:351.823.1, Vol. 6, No 1, University of Nis, Nis, 2009, pp. 49.-54.

  
  

  Janković Predrag, Radovanović Miroslav, Identifikacija i klasifikacija faktora koji utiču na proces sečenja abrazivnim vodenim mlazom, IMK-14 - Istraživanje i razvoj, Vol. 16, No. 2, 2010, str. 71-76

  
  

  Janković Predrag, Igić Tomislav, Nikodijević Dragiša, Process parameters effect on material removal mechanism and cut quality of abrasive water jet machining, Journal Theoretical and Applied Mechanics, 2012, Vol. 40, No.1, 247-261

  
  

  Lazarević Dragoljub, Madić Miloš, Janković Predrag, Lazarević Anđela, Cutting Parameters Optimization for Surface Roughness in Turning Operation of Polyethylene (PE) Using Taguchi Method, Tribology in Industry, 2012, Vol. 34, No 2, pp. 68-73

  
  

  Lazarević Dragoljub, Madić Miloš, Janković Predrag, Lazarević Anđela, Surface roughness minimization of polyamide PA-6 turning by Taguchi method, Journal of Production Engineering, 2012, Vol. 15, No. 1, pp. 29-32

  
  

  M. Radovanović, P. Janković, M. Madić, Predictive models of traverse rate in abrasive water jet cutting based on Ra and GA, Academic journal of manufacturing engineering, Vol. 10, issue 1/2012, 2012, pp. 107-112

  
  

  J.Manojlović, P. Janković, Bridge measuring circuits in strain gauge sensor configuration, Facta Universitatis Series: Mechanical Engineering, University of Niš, Serbia, Vol. 11 No 1 2013, pp. 75-84

  
  

  P. Janković, J. Manojlović , S. Đukić, Virtual instrumentation for strain measerument using Wheatston bridge model, Facta Universitatis Series: Electronics and Energetics, University of Niš, Serbia, Vol. 26 No 1 2013, pp. 69-78

  
  

  Janković P., Igić T., Radovanović M., Turnić D., Živković S., Applications of the abrasive water jet technique in civil engineering, Facta Universitatis, Series: Architecture and Civil Engineering, 2019, Vol. 17, No. 4, pp. 417-428

  
  

  Marinković V., Janković P., Application of Regression Method for Determining the Die Land Dimensions based on Data from Industry, FME Transactions,  2017, Vol. 45, No. 4, 590-596

  
  

  J. Baralić, P. Janković, M. Popović, Uticaj brzine rezanja i dubine reza na geometriju prednje linije reza pri obradi abrazivnim vodenim mlazom, IMK-14, 2019, Broj 25(2019) 1, pp: 27-30

  
  

  Madić M., Radovanović M., Janković P., Petković D., Mladenović S., Analysis of laser cutting process by development of performance diagrams, Journal of Production Engineering, 2016, Vol. 19, No. 2, pp. 1-6

  
  

  Jovanović D., Janković P., Radovanović M., Đurić S., The replacement of cadmium coating on parts of the weapon with tungsten-disulphide coating, Advanced Technologies, Faculty of Technology, Leskovac, 2018, Vol. 7, No. 1, 64-68

• Radovi na naučnim skupovima međunarodnog značaja:

  P. Janković, J. Milovanović, S. Mladenović, Possibilities of dimensioning the parametrically-described parts of the punching and piercing tool, 2^nd International conference “Research and development in mechanical Industry-RaDMI”, Kruševac, 2002. Proceedings, Vol. 2, pp. 645-648.

  
  

  P. Janković, M. Radovanović, N. Vićovac, Essential Components of Abrasive Water Jet Cutting Machines, Scientific Conference with International Participation ²Manufacturing and Management in 21^st Century², University "St. Cyril and Metodius" - Skopje, Faculty of Mechanical Engineering, Production and Industrial Engineering Association, Ohrid, FYR Macedonia, Ohrid, 2004, pp.100-105

  
  

  S. Mladenović, P. Janković, Parametric design of complex sheet metal forming tools, Scientific Conference with International Participation ²Manufacturing and Management in 21^st Century², University ²Ss. Cyril and Methodius² - Skopje, Faculty of Mechanical Engineering, Production and Industrial Engineering Association, Ohrid, , FYR Macedonia, Ohrid, 2004

  
  

  P. Janković, M. Radovanović, N. Vićovac, Abrasive materials for abrasive water jet cutting, 5^th International Conference ²Research and Development in Mechanical Industry² RaDMI 2005, Faculty of mechanical engineering of Kraljevo, High technical mechanical school of Trstenik, Vrnjačka Banja, Serbia and Montenegro, 2005, pp. 158-162.

  
  

  P. Janković, M. Radovanović, Nontraditional machining by abrasive water jet cutting, The Fifth Conference Heavy Machinery HM 2005, Faculty of Mechanical Engineering Kraljevo, Trstenik, 2005, pp. II A.55-II A.58.

  
  

  B. Rančić, P. Janković, Determining the blank shape and size for square cups in oil-hydraulic forming process, 5^th International Conference ²Research and Development in Mechanical Industry² RaDMI 2005, Faculty of mechanical engineering of Kraljevo, High technical mechanical school of Trstenik, Vrnjačka Banja,  2005, pp. 775-780.

  
  

  B. Rančić, P. Janković, Determining of blank holder pressure for square cups in oil-hydraulic forming process, 5^th International Conference ²Research and Development in Mechanical Industry² RaDMI 2005, Faculty of mechanical engineering of Kraljevo, High technical mechanical school of Trstenik, Vrnjačka Banja, 2005, pp. 769-774.

  
  

  P. Janković, M. Radovanović, Parameters of abrasive water jet cutting process,
  6^th International Conference ²Research and  Development in Mechanical Industry² RaDMI 2006, University of Kragujevac, Faculty of Mechanical Engineering Kraljevo, High Technical Mechanical School of Trstenik, Budva, Montenegro, 2006, pp. 343-346.

  
  

  P. Janković, M. Radovanović, Posible applications of abrasive water jet machining, 7^th International Conference ²Research and Development in Mechanical Industry² RaDMI 2007, Faculty of mechanical engineering of Kraljevo, High Technical Mechanical School of Trstenik, 2007, pp.183-189.

  
  

  M. Radovanović, M. Madić, P. Janković, Comparasion of regression model and artificial neural network model for predicting the main cutting force by turning, Buletinul Institutului Politechnic din Iasi, Publicat de Universitatea Tehnica ”Gh. Asachi”, tom LIV (LVIII), fac.2, Sectia Constructii de Masini, 12^th International Conference TCMR-2008, ISSN 1011-2855, Iasi, Romania, 2008, pp. 95-104.

  
  

  M. Radovanović, M. Madić, P. Janković, Comparasion of regression models for predicting the components of cutting force, International Scientific Conference UNITECH'08, Technical University of Gabrovo, Gabrovo, Bulgaria, 2008, pp. II-472 - II-475.

  
  

  M. Radovanović, M. Madić, P. Janković, Artificial neural network modeling of cutting force components by turning, International Scientific Conference UNITECH'08, Technical University of Gabrovo, Gabrovo, Bulgaria, 2008, pp. II-486-II-490.

  
  

  M. Radovanović, M. Madić, P. Janković, Application of neural networks in metal cutting, 8^th International Conference ²Research and Development in Mechanical Industry² RaDMI 2008, ISBN 978-86-83803-24-3, Užice, Serbia, 2008,  pp. 322-328.

  
  

  P. Janković, M. Radovanović, Characteristics of part accuracy and errors by abrasive water jet cutting, 8^th International Conference ²Research and Development in Mechanical Industry² RaDMI 2008, Užice, Serbia, 2008, pp. 215-220.

  
  

  P. Janković, M. Radovanović, Experimental investigation and mathematical modeling of cutting speed by abrasive water jet, The Sixth International Triennial Conference ²Heavy Machinery - HM2008², Faculty of Mechanical Engineering Kraljevo,  University of Kragujevac, Kraljevo, Serbia, 2008, pp. F.29-32.

  
  

  V. Pesic, Nidal Shaban, P. Janković, Sustainable agricultural production and resources preservation, International scientific Conference Good practices for sustainable agricultural production, University of Forestry, Sofia, 2009, pp. 158-162.

  
  

  P. Janković, M. Radovanović, G. Radenković, The ability to process modern materials by abrasive wateer jet cutting, Mechanical Engineering in XXI Century, Faculty of Mechanical Engineeing, Niš, Serbia, 2010. pp.

  
  

  Radovanović Miroslav, Janković Predrag, Miloš Madić, Estimate of cutting data by laser cutting, abrasive water jet cutting and plasma cutting, Proceedings of International Scientific Conference "UNITECH'10", Gabrovo, Bulgaria, 2010, II-431 - II-434

  
  

  Radovanović Miroslav, Miloš Madić, Janković Predrag, Modeling of machining process bz neural network, Proceedings of International Scientific Conference "UNITECH'10", Gabrovo, Bulgaria, 2010, II-435 - II-438

  
  

  Janković Predrag, Rančić Bojan, Some specific features of a polyimer composites stamping process, Proceedings of 7th International Conference "Research and Development of Mechanical Elements and Systems" IRMES 2011, Zlatibor, Serbia, 2011, 333-338

  
  

  Janković Predrag, Radovanović Miroslav, Baralić Jelena, Abrasive material for abrasive water jet cutting and their influence on cut surface quality, Proceedings of the 12^th International Conference on Tribology, SERBIATRIB '11, Kragujevac, Serbia, 2011, 98-102

  
  

  Baralić Jelena, Nedić Bogdan, Janković Predrag, The traverse speed influence on surface roughness in abrasive waterjet cutting applications, Proceedings of the 12^th International Conference on Tribology, SERBIATRIB '11, Kragujevac, Serbia, 2011, 349-354

  
  

  Janković Predrag, Milenković Dragica, Clean Manufacturing Technologies: Water Jet Cutting Case Study and a Review, Proceedings of the 24th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, ECOS 2011, Novi Sad, Serbia, 2011, 2358-2367

  
  

  Janković Predrag, Radovanović Miroslav, Baralić Jelena, Cut quality in abrasive water jet cutting, Proceedings of the 34^th International Conference on Production Engineering, Niš, Serbia, 2011, 435-438

  
  

  Baralić Jelena, Nedić Bogdan,  Janković Predrag, Machining parameters effect on the jet retardation in abrasive wate jet machining, Proceedings of the 34^th International Conference on Production Engineering, Niš, Serbia, 2011, 443-446

  
  

  Rančić Bojan, Janković Predrag, Temeljkovski Dragan, Determining some parameters in the oil hydraulic process of square cups deep drawing, Proceedings of the 34^th International Conference on Production Engineering, Niš, Serbia, 2011, 281-284

  
  

  Radovanović Miroslav, Laurentiu Slatineanu, Janković Predrag, Analytical modeling of treverse rate in abrasive water jet cutting of aluminium 6061-T6, Proceedings of the International Scientific Conference UNITEH '11, Gabrovo, Bulgaria, 2011, pp.II-409 - II-414

  
  

  Janković Predrag., Radovanović Miroslav, Effect of process parameters on cutting ability in abrasive water jet machining, Proceedings of the 11^th International Scientific Conference MMA 2012, Novi Sad, Serbia, 2012, 25-28

  
  

  Janković Predrag, Blagojević Vladislav, Estimation method for maximum cutting speed by abrasive water jet machining, Proceedings of the XI International Conference on Systems, Automatic Control and Measurements – SAUM 2012, Nis, Serbia, 2012, pp. 144-147

  
  

  Rančić Bojan, Janković Predrag, Živanović Dragan., Arsić Miodrag, Force transducer model based on virtual instruments strain gage amplifier for engineering education, Proceedings of the XI International Conference on Systems, Automatic Control and Measurements - SAUM 2012, Nis, Serbia, 2012, pp. 290-293

  
  

  J.Baralić, P. Janković, B.Nedić, The waviness of an abrasive water jet generated surface, 13^th International Conference on Tribology SERBIATRIB ’13, Kragujevac, Serbia, 2013, pp. 217-221

  
  

  P. Janković, M. Radovanović, Abrasive Water Jet Cutting in Comparison with Other Non-Conventional Cutting Technologies, The 2nd international conference "Mechanical Engineering in XXI Century", Faculty of Mechanical Engineering, University of Nis, Serbia, 2013, pp. 57-60

  
  

  Slavenko Đukić, Predrag Janković, Jelana Manojlović, A LabVIEW Based Virtual Instrument Force Transducer, The 2nd international conference "Mechanical Engineering in XXI Century", Faculty of Mechanical Engineering, University of Nis, Serbia, 2013, pp. 293-296

  
  

  Snežana Đorić-Veljković, Sofija Rančić, Predrag Janković, Bojan Rančić, Using Novel Systems and Installations for Introducing Daylight, Proc. of 9th Scientific Technical Conference Contemporary theoty and Practice in Building Development, Banja Luka, 11. -12. April, 2013, pp. 405-413

  
  

  J. Manojlović, P. Janković, Measurement of non-electrical quantities by electrical means in students’ education, 35^th International conference on production engineering, University of Kragujevac, Faculty of Mechanical and Civil Engineering, Kraljevo, 2013, pp. 345-348

  
  

  J. Baralić, B. Nedić, P. Janković, Effect of traverse speed and operating pressure on surface roughness in AWJ machining, 35^th International conference on production engineering, University of Kragujevac, Faculty of Mechanical and Civil Engineering, Kraljevo, 2013, pp. 137-140

  
  

  P. Janković, M. Radovanović, V. Blagojević, Process parameters effect on characteristics of kerf geometry by abrasive water jet cutting, 35^th International conference on production engineering, University of Kragujevac, Faculty of Mechanical and Civil Engineering, Kraljevo, 2013, pp. 129-132

  
  

  Janković P., Radovanović M., Dodun O., Madić M., Petković D., Aspects of machining parameter effect on cut quality in abrasive water jet cutting, Applied Mechanics and Materials, Vols. 809-810, Innovative Manufacturing Engineering, 2015, Part 1, pp. 201-206

  
  

  Janković P., Radovanović M., Baralić J., Nedić B., Topography of surface machined by abrasive water jet cutting, The 3^rd International Conference Mechanical Engineering in XXI Century, Niš, Serbia, 17-18 September, 2015, pp. 383-386 

  
  

  Janković P., Baralić J., Blagojević V., Modeling as way to better understanding of the influencing process factors - AWJ machining case study, XIII International Conference on Systems, Automatic Control and Measurements, November 9th – 11th 2016, Niš, Serbia, pp. 51-54

  
  

  Janković P., Madić M., Radovanović M., Petković D., Using the GP in the analysis and modeling of specific cutting energy in AWJ, 37th International Conference on Production Engineering -Serbia, October 25-26, Kragujevac, Serbia, 2018, pp. 107-112

  
  

  Đorić-Veljković S., Janković P., Rančić S., Kocić M., Stojanović-Krasić M., Novel materials for optical fibers, 13^th Symposium “Novel Technologies and Economic Development”, Leskovac, Serbia, 2019, pp. 135

  
  

   

• Radovi na domaćim naučnim skupovima:

  D. Vukićević, D. Petković, P. Blagojević, P. Janković, Armirano betonska noseća struktura prese - matematičko modeliranje i način armiranja, 25. Savetovanje proizvodnog mašinstva Jugoslavije, Univerzitet u Beogradu, Mašinski fakultet u Beogradu, Beograd, 1994.

  
  

  P.Janković, D. Vukićević, Izbor materijala u proizvoda u funkciji zaštite životne sredine, Preventivni inženjering i životna sredina, Institut "1. Maj", Niš, 1995

  
  

  P. Blagojević, P. Janković, Metalna vlakna za ojačavane kompozitnih materijala zasnovanim na cementu, 22. JUPITER Konferencija, Univerzitet u Beogradu, Beograd, 1996

  
  

  D. Vukićević, P. Janković, Razvoj savremenih materijala u mašinogradnji sa aspekta ekološkog upravljanja, Ekološko upravljanje ISO 14000 i sistemi ekološkog menadžmenta u preduzećima, YU Forum kvaliteta, Kruševac, 1996, str.11-14.

  
  

  P. Janković, D. Vukićević, Specifičnosti obrade kompozitnih materijala razdvajanjem, 23. JUPITER Konferencija, Mašinski fakultet u Beogradu, Beograd, 1997, str. 269-273.

  
  

  P. Janković, J. Vukićević, D. Vukićević, Proces razdvajanja pri prosecanju i probijanju polimernih kompozitnih materijala, Zbornik radova sa XXV Jupiter Konferencije, 21. simpozijum NU-ROBOTI-FTS, Beograd, 1999, str. 3.129-3.134.

  
  

  P. Janković, J. Milovanović, Identifikacija faktora specifičnih za određivanje vrednosti sile pri prosecanju i probijanju polimernih materijala, 28. Savetovanje proizvodnog mašinstva Jugoslavije, Zbornik radova - Obrada deformisanjem, Kraljevo, 2000, str. 2.19-2.24

  
  

  P. Janković, J. Milovanović, Savremeni materijali i metode projektovanja kao podloga ekologizacije proizvodnih tehnologija, 25. Međunarodna konferencija “Ekologizacija ekonomsko-tehnološkog razvoja - imperativ XXI veka”, Institut za kvalitet radne i životne sredine "1. maj" Niš, Niška Banja, 2000

  
  

  J. Milovanović, P. Janković, Prilog vrednovanju kvaliteta presečne površine pri prosecanju i probijanju, Balkanski savez metalurga, Simpozijum – deformisanje i struktura metala i legura, Beograd, jun 2002, str. 85-89.

  
  

  P. Janković, S. Nedeljković, Računarska podrška pri projektovanju tehnologije obrade lima preosecanjem, savijanjem i izvlačenjem, 29. Savetovanje proizvodnog mašinstva Jugoslavije, Beograd, 2002, Zbornik radova na CD rom-u.

  
  

  P. Janković, M. Radovanović, N. Vićovac, Pumpa visokog pritiska – "srce" mašine za konturno sečenje abrazivnim vodenim mlazom, 29. Naučno-stručni skup sa međunarodnim učešćem HIPNEF 2004, Mašinski fakultet Univerziteta u Nišu, Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije (SMEITS) - Beograd, Vrnjačka Banja, 2004, str.113-118.

  
  

  P. Janković, M. Radovanović, N. Vićovac, Obrada abrazivnim vodenim mlazom, 30. Savetovanje proizvodnog mašinstva Jugoslavije, Vrnjačka Banja, 2005,
  str. 263-268.

  
  

  P. Janković, Lj. Janković, Revitalizacija upravljanja numerički  upravljane prese "TRUMATIC 150", 30. Savetovanje proizvodnog mašinstva Jugoslavije, Vrnjačka Banja, 2005

  
  

  P. Janković, V. Blagojević, J. Milovanović, Mogućnost snižavanja troškova sistema vazduha pod pritiskom, 30. HIPNEF 2006 sa međunarodnim učešćem, Vrnjačka Banja, 2006, str. 183-188.

  
  

  B. Rančić, P. Janković, S. Mladenović, S. Planić, Eksperimentalno određivanje sile pritezanja i pomeranja kod C-spojnice za železničke šine, XII Naučno-stručna konferencija o železnici Želkon '06, Mašinski fakultet, Niš, 2006, str. 261-264.

  
  

  P. Janković, M. Stojiljković, V. Blagojević, Aspekti energetske efikasnosti pneumatskih sistema u industriji, 20. Kongres o procesnoj industriji PROCESING 2007, Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije (SMEITS), Zbornik radova na CD-u, Beograd, 2007

  
  

  V. Blagojević, M. Stojiljković, P. Janković, Smanjenje gubitaka vazduha pod pritiskom kod pneumatskog cilindra dvostranog dejstva, 20. Kongres o procesnoj industriji PROCESING 2007, Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije (SMEITS), Beograd, 2007

  
  

  P. Janković, M. Stojiljković, V. Blagojević, Struktura troškova vazduha pod pritiskom, 13. Simpozijum termičara Srbije SIMTERM 2007, Zbornik radova na CD-u, Društvo termičara Srbije, Sokobanja, 2007

  
  

  V. Blagojević, M. Stojiljković, P. Janković, Mogućnost korišćenja infracrvene termografije u industrijskim sistemima, 13. Simpozijum termičara Srbije SIMTERM 2007, Zbornik radova na CD-u, Društvo termičara Srbije, Sokobanja, 2007

  
  

  P. Janković, M. Radovanović, Klasifikacija i svojstva abrazivnih materijala pri obradi abrazivnim vodenim mlazom, 31. Naučno-stručni skup HIPNEF 2008, Mašinski fakultet Univerziteta u Nišu, Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije (SMEITS) – Beograd, Vrnjačka Banja, 2008, str. 587-592.

  
  

  P. Janković, M. Radovanović, Čiste tehnologije u funkciji ekologizacije proizvodnih procesa, I konferencija Održivi razvoj i klimatske promene, Univerzitet u Nišu, Mašinski fakultet, Niš, 2008, str. 155-159.

  
  

  P. Janković, J. Milovanović, Novi materijali u izradi struktura i elemenata u mašinogradnji, kao podloga održivog razvoja, I konferencija Održivi razvoj i klimatske promene, Univerzitet u Nišu, Mašinski fakultet, Niš, 2008, str. 161-165.

  
  

  P. Janković, A. Lazaravic, D. Lazaravić, Rezanje plazmom i unapređenja kvaliteta presečne površine,  Zbornik radova sa 33. savetovanja Proizvodnog mašinstva Srbije sa međunarodnim učešćem, Beograd, 2009, str. 39-42.

  
  

  V. Pešić, P. Janković, A. Vojvodić, Standardi upravljanja životnom sredinom, Naučna konferencija "Ekološka bezbjednost u postmodernom ambijentu, Banja Luka, BiH, god. 2009, str. 625-631

  
  

  P. Janković, M. Radovanović, Savremeni postupci obrade - put ka ekološkim tehnologijama, Naučna konferencija "Ekološka bezbjednost u postmodernom ambijentu, Banja Luka, BiH, god. 2009, str. 127-131.

  
  

  P. Janković, M. Radovanović, Uloga industrijskih tehnologija u očuvanju životne sredine, II konferencija Održivi razvoj i klimatske promene SUSTAINNIS 2010, Mašinski fakultet u Nišu, 2010, str. 274-279

  
  

  P. Janković, S. Planić, Uticaj materijala železničkih pragova na životnu sredinu, II konferencija Održivi razvoj i klimatske promene SUSTAINNIS 2010, Mašinski fakultet u Nišu, 2010, str. 118-122

• Tehnička rešenja:

  Janković P., Radovanović M., Lazarević D., Blagojević V., Madić M., Nedić B., Baralić J., Tehnološki procesor za predviđanje geometrije reza pri sečenju vodenim mlazom sa dodatkom abraziva, Mašinski fakultet Niš, 2015.

  
  

  Radovanović M., Janković P., Madić M., Kovačević M., Blagojević V., Procesor za izbor tehnoloških parametara procesa laserskog sečenja, Mašinski fakultet Niš, 2015.

  
  

  Blagojević V., Radovanović M., Janković P., Madić M., Laboratorijsko postrojenje za proveru upravljanja prilikom sinhronizacije pneumatskih izvršnih elemenata, Mašinski fakultet Niš, 2015.