Dodatne informacije

• Lični podaci

• Datum rođenja: 05/07/1976
• Mesto rođenja: Leskovac

• Obrazovanje

• Fakultet: Mašinski Fakultet, Niš
• Odsek / Grupa / Smer: Proizvodno mašinstvo
• Godina diplomiranja: 2001

• Spisak publikacija

• Knjige i udžbenici:

  Стојковић, М.С., Трифуновић, М., Ранђеловић, С., Стојковић, Ј., Витковић, Н., Турудија, Р., 2023. Моделирање технолошких операција нумерички управљаних машина помоћу рачунара: computer aided process planning and computer aided manufacturing CAPP/CAM. Ниш: Машински факултет.стр.1 књ. (разл. паг.).

  
  

  Никола Витковић, Драган Мишић, Милош Стојковић, Практикум из веб програмирања, ISBN: 978-86-6055-093-6, Ниш, 2017, Универзитетски уџбеник

  
  

  Драган Мишић, Никола Витковић, 2015, Увод у објектно оријентисано програмирање, Машински факултет Универзитета у Нишу, ISBN 978-86-6055-071-4, Универзитетски уџбеник

• Radovi u časopisima sa IMPACT faktorom:

  Vitković, N., Marinković, D., Stan, S. D., Simonović, M., Miltenović, A., Tomić, M., Barać, M. (2024). Decision Support System for Managing Marshalling Yard Deviations. Acta Polytechnica Hungarica, Journal of Applied Sciences, Special Issue on Up-to-Date Problems in Modern Railways and Optimization in Engineering Structures, 21(1), 121–134. https://doi.org/10.12700/APH.21.1.2024.1.8

  
  

  Vitković, N., Stojković, J. R., Korunović, N., Teuţan, E., Pleşa, A., Ianoşi-Andreeva-Dimitrova, A., Górski, F., & Păcurar, R. (2023). Extra-Articular Distal Humerus Plate 3D Model Creation by Using the Method of Anatomical Features. Materials, 16(15), 5409. https://doi.org/10.3390/ma16155409

  
  

  Stojković, J. R., Turudija, R., Vitković, N., Górski, F., Păcurar, A., Pleşa, A., Ianoşi-Andreeva-Dimitrova, A., & Păcurar, R. (2023). An Experimental Study on the Impact of Layer Height and Annealing Parameters on the Tensile Strength and Dimensional Accuracy of FDM 3D Printed Parts. Materials, 16(13), 4574. https://doi.org/10.3390/ma16134574

  
  

  Vitković, N., et al. (2023) Creation of personalized 3d model of bone scaffold by using curve and pattern based methodologies. Acta technica napocensis - series: applied mathematics, mechanics, and engineering, v. 66, n. 3, https://atna-mam.utcluj.ro/index.php/Acta/article/view/2181

  
  

  Misic, D., Stojkovic, M., Trifunović, M., Vitkovic, N. (2022). Detection and handling exceptions in business process management systems using Active Semantic Model. Facta Universitatis Series Mechanical Engineering. 10.22190/FUME211115026M.

  
  

  Jelena Milovanovic, Milos Stojkovic, Milan Trifunovic, Nikola Vitkovic, Review of bone scaffold design concepts and design methods, FACTA UNIVERSITATIS-SERIES MECHANICAL ENGINEERING, UNIV NIS, 0354-2025, 10.22190/FUME200328038M, Nov2020.

  
  

  Mitić Jelena, Vitković Nikola, Manić Miodrag, Trajanović Miroslav, Petrović slađana, Arsić Stojanka, Reverse modeling of the human mandible 3D geometric model, Vojnosanitetski Pregled, MILITARY MEDICAL ACAD-INI, 77, 3, pp. 262 - 270, 0042-8450, 2020.

  
  

  Vitkovic Nikola, Radovic Ljiljana, Trajanovic Miroslav, Manic Miodrag, 3D Point Cloud Model of Human Bio Form Created by the Application of Geometric Morphometrics and Method of Anatomical Features: Human Tibia Example, Filomat, UNIV NIS, FAC SCI MATH, 33, 4, pp. 1217 - 1225, 0354-5180, 10.2298/FIL1904217V, NIS, 2019.

  
  

  Nikola Korunović, Cristiano Fragassa, Dragan Marinković, Nikola Vitković, Miroslav Trajanović, Korunović, N., Fragassa, C., Marinković, D., Vitković, N., & Trajanović, M. (2019). Performance evaluation of cord material models applied to structural analysis of tires. Composite Structures, 224, 111006., COMPOSITE STRUCTURES, 224, 0263-8223, 10.1016/j.compstruct.2019.111006, Sep2019.

  
  

  Husain, K.N., Stojkovic, M., Vitkovic, N., Milovanovic, J., Trajanovic, M., Rashid, M., Milovanovic, A., Procedure for Creating Personalized Geometrical Models of the Human Mandible and Corresponding Implants, Tehnicki Vjesnik-Technical Gazette, UNIV OSIJEK, TECH FAC, 26, 4, pp. 1044 - 1051, 1330-3651, 10.17559/TV-20181009193111, 2019

  
  

  Husain Karim, Rashid Mohammed, Vitkovic Nikola, Mitic Jelena, Milovanovic Jelena, Stojkovic Milos, GEOMETRICAL MODELS OF MANDIBLE FRACTURE AND PLATE IMPLANT, FACTA UNIVERSITATIS-SERIES MECHANICAL ENGINEERING, UNIV NIS, 16, 3, pp. 369 - 379, 0354-2025, 10.22190/FUME170710028H, Dec2018.

  
  

  Rashid Mohammed, Husain Karim, Vitkovic Nikola, Manic Miodrag, Petrovic Sladana, TOWARDS PATIENT SPECIFIC PLATE IMPLANTS FOR THE HUMAN LONG BONES: A DISTAL HUMERUS EXAMPLE, FACTA UNIVERSITATIS-SERIES MECHANICAL ENGINEERING, UNIV NIS, 16, 3, pp. 347 - 357, 0354-2025, 10.22190/FUME170612027R, Dec2018.

  
  

  Stojkovic Milos, Veselinovic Marko, Vitkovic Nikola, Marinkovic Dragan, Trajanovic Miroslav, Arsic Stojanka, Mitkovic Milorad, Reverse Modelling of Human Long Bones Using T-Splines - Case of Tibia, Tehnicki Vjesnik-Technical Gazette, UNIV OSIJEK, TECH FAC, 25, 6, pp. 1753 - 1760, 1330-3651, 10.17559/TV-20180129210021, SLAVONSKI BROD, Dec2018.

  
  

  Vitkovic Nikola, Stojkovic Milos, Majstorovic Vidosav, Trajanovic Miroslav, Milovanovic Jelena, Novel design approach for the creation of 3D geometrical model of personalized bone scaffold, CIRP ANNALS-MANUFACTURING TECHNOLOGY, ELSEVIER SCIENCE BV, 67, 1, pp. 177 - 180, 0007-8506, 10.1016/j.cirp.2018.04.064, AMSTERDAM, 2018.

  
  

  Vitkovic Nikola, Mladenovic Srdan, Trifunovic Milan, Zdravkovic Milan, Manic Miodrag, Trajanovic Miroslav, Misic Dragan, Mitic Jelena, Software Framework for the Creation and Application of Personalized Bone and Plate Implant Geometrical Models, Journal of Healthcare Engineering, HINDAWI LTD, 2040-2295, 10.1155/2018/6025935, LONDON, 2018.

  
  

  Misic Dragan, Zdravkovic Milan M, Vitkovic Nikola, Mitkovic Milan M, MItkovic Milorad, Real-Time Monitoring of Bone Fracture Recovery by Using Aware, Sensing, Smart, and Active Orthopedic Devices, IEEE Internet of Things Journal, 5, 6, pp. 4466 - 4473, 2327-4662, 10.1109/JIOT.2018.2819623, 2018.

  
  

  M. Rashid, K. Husain, N. Vitković, M. Manić, M. Trajanović, M. Mitković, M. Mitković, Geometrical Model Creation Methods for Human Humerus Bone and Modified Cloverleaf Plate, Journal of Scientific & Industrial Research (JSIR), Journal of Scientific & Industrial Research (JSIR), 76, 10, pp. 631 - 639, 0975-1084, -1384175-, Oct2017.

  
  

  Trifunovic, M., Stojkovic, M., Trajanovic, M., Manic, M., Misic, D. and Vitkovic, N., 2015, Analysis of semantic features in free-form objects reconstruction, Artificial Intelligence for Engineering Design, Analysis and Manufacturing (AI EDAM), Vol. 30, No. 1, pp. 44-63, DOI: http://dx.doi.org/10.1017/S0890060415000153 

  
  

  Vitković, N., Mitić, J., Manić, M., Trajanović, M., Husain, K., Petrović, S., Arsić, S., 2015, The Parametric Model of the Human Mandible Coronoid Process Created by Method of Anatomical Features, Computational and Mathematical Methods in Medicine, 2015, ID 574132, p.10, doi:10.1155/2015/574132 

  
  

  Majstorovic, V., Trajanovic, M., Vitkovic, N., Stojkovic, M., 2013, Reverse engineering of human bones by using method of anatomical features, CIRP Annals - Manufacturing Technology, Vol. 62, No. 1, pp. 167-170 

  
  

  Vitković, N., Milovanović, J., Korunović, N., Trajanović, M., Stojković, M., Mišić, D., Arsić, S., 2013, Software system for creation of human femur customized polygonal models. Computer Science and Information Systems, Vol. 10, No. 3, pp. 1473-1497 

  
  

  Zdravković M., Trajanović M., Stojković M., Mišić D., Vitković N., 2012, A case of using the Semantic Interoperability Framework for custom orthopedic implants manufacturing, Annual Reviews in Control, Vol. 36, No. 2, pp. 318-326 

  
  

  Stojković M., Milovanović J., Vitković N., Trajanović M., Arsić S., Mitkovic M., 2012, Analysis of femoral trochanters morphology based on geometrical model, Journal of scientific & industrial research, Vol. 71, No. 3, pp. 210-216 

  
  

  Vitković N., Milovanović J., Trajanović M., Korunović N., Stojković M., Manić M., 2012, Different Approaches for the Creation of Femur Anatomical Axis and Femur Shaft Geometrical Models, Strojarstvo: časopis za teoriju i praksu u strojarstvu, Vol. 54, No. 3, pp. 247-255

  
  

  Korunović N., Trajanović M., Stojković M., Vitković N., Trifunović M., Milovanović J., 2012, Detailed vs. Simplified Tread Tire Model for Steady-State Rolling Analysis, Strojarstvo: časopis za teoriju i praksu u strojarstvu, Vol. 54, No. 2, pp. 153-160

  
  

  Stojković M., Milovanović J., Vitković N., Trajanović M., Grujović N., et al., 2010, Reverse modeling and solid free-form fabrication of sternum implant, Australasian Physical & Engineering Science in Medicine, Vol. 33, No. 3, pp. 243-250

  
  

   

• Radovi u ostalim časopisima:

  Barać, M., Vitković, N., Marinković, D., Janković, P., Mišić, D. (2023). Optimizing cutting fluid usage in cutting processes on CNC machines: A conceptual digital twin model for ecological sustainability. Acta Technica Jaurinensis, 16(3), 90–98. https://doi.org/10.14513/actatechjaur.00697

  
  

  Barać, M., Manić, M., Vitković, N. (2023). IOT BASED INFORMATION SYSTEM FOR CLEAN MANUFACTURING. Innovative Mechanical Engineering, 2(1), 104–119.

  
  

  Nikola Vitković, Miloš Simonović, Aleksandar Miltenović, Milan Trifunović, SOFTWARE MODULE FOR THE VISUALIZATION AND PLANNING OF MARSHALLING YARD OPERATIONS, Machine Design, Fakultet tehničkih nauka,, 11, 1, pp. 1821 - 1259, 1821-1259, 10.24867/MD.11.2019.1.29-32, 2019.

  
  

  Stojanka Arsić , Milena Trandafilović, Sonja Janković, Dragana Ilić, Bojan Nedović, Nikola Vitković,  Miloš Stojković, Milica Tufegdžić5, Jelena Mitić,  Miroslav Trajanović, ANALYSIS OF THE HUMAN CEPHALOMETRIC PARAMETERS IMPORTANT FOR DENTAL PRACTICE, Facta Universitatis. Series: Medicine and Biology, Univerzitet u Nišu, 0354-2017, 10.22190/FUMB180912002A, Oct2019.

  
  

  N. Korunović, M. Stojković, J. Milovanović, N. Vitković, M. Trifunović, M. Manić, M. Trajanović, Bioengineering and tire design related research at LIPS laboratory – a summary of results, JOURNAL OF THE SERBIAN SOCIETY FOR COMPUTATIONAL MECHANICS, SERBIAN SOC COMPUTATIONAL MECHANICS, 10, 1, pp. 71 - 101, 1820-6530, 612.766, 10.5937/jsscm1601071K, 2016.

  
  

  Vitković, N., Mitković, M.M., Mitković, B.M., Korunović, N., Stevanović, D., Veselinović, M.,2015, Reverse engineering of the mitkovic type internal fixator for lateral tibial plateau, Facta Universitatis, Series: Mechanical Engineering, Vol. 13, No. 3, pp. 259-268

  
  

  Mišić, D., Manić, M.,  Vitković, N.,  Korunović, N., 2015, Toward an integrated information system for the design, manufacturing and application of customized implants, Facta Universitatis, Series: Mechanical Engineering, Vol. 13, No. 3, pp. 307-323

  
  

  Tufegdžić, M., Trajanovic, M., Vitković, N., Arsić, S., 2013, Reverse engineering of the human fibula by using method of anatomical features, FACTA UNIVERSITATIS Series: Mechanical Engineering, Vol. 11, No. 2, pp. 133 - 139

  
  

  S.Vulovic, N.Korunovic, M.Trajanovic, N.Grujovic, N. Vitkovic , 2012, Finite element analysis of CT based femur model using finite element program PAK, Journal of the Serbian Society for Computational Mechanics , Vol. 5, No. 2, pp. 160-166

  
  

  Trajanović M., Korunović N., Milovanović J., Vitković N., Mitkovic, M., 2010, Application of computer models of mitković selfdynabizable internal fixator in rehabilitation of femur traumas, 2010, Facta universitatis - series: Mechanical Engineering, Vol. 8, No. 1, pp. 27-38
  

  
  

  Trajanović, M., Korunović, N., Milovanović, J., Vitković, N., Mitković, M., 2010, Primena računarskih modela samodinamizirajućeg unutrašnjeg fiksatora po Mitkoviću u saniranju trauma femura,  Facta universitatis - series: Mechanical Engineering, Vol. 8, No. 1, pp.  27-38.

  
  

   

• Radovi na naučnim skupovima međunarodnog značaja:

  Vitković, N., Trajanović, M., Barać, M., Trifunović, M., Stojković, J., Stan, S.-D., & Pacurar, R. (2024). Novel Approach for Education in Biomedical Engineering Based on Atomic Learning. Disruptive Information Technologies for a Smart Society, 872, 279–287. https://doi.org/10.1007/978-3-031-50755-7_26

  
  

  Trajanovic, M., Vitkovic, N., Korunovic, N., Misic, D., & Arandjelovic, J. (2023). The Impact of Engineering Enabling Technologies on the Further Development of Personalized Orthopedics [Springer]. 19th Nordic-Baltic Conference on Biomedical Engineering and Medical Physics, 89, 1–8. https://doi.org/10.1007/978-3-031-37132-5_1

  
  

  Vitković, N., Trajanović, M., Stojković, M., Pacurar, R., Stan, S.-D., & Górski, F. (2023). The Reverse Engineering of Human Organs Based on the Application of Method of Anatomical Features [Springer International Publishing]. 19th Nordic-Baltic Conference on Biomedical Engineering and Medical Physics, 89, 119–128. https://doi.org/10.1007/978-3-031-37132-5_16

  
  

  Nikola Vitkovic, , Miroslav Trajanovic, , Miodrag Manic, , Nikola Korunovic, , Ljiljana Radovic, , & Razvan Pacurar, . (2022). Procedure for the Creation of Complex Free-Form Human Bones Surfaces for Manufacturing of Personalized Implants. IFIP Advances in Information and Communication Technology (United States). https://doi.org/10.1007/978-3-030-94399-8_2

  
  

  Vitković, N., Trajanović, M., Aranđelović, J., Păcurar, R., & Borzan, C. (2022). Contact Surface Model Parameterization of the Extra-Articular Distal Humerus Plate [Springer]. Advances in Manufacturing III. https://doi.org/10.1007/978-3-030-99769-4_7

  
  

  Trifunović, M., Madić, M., & Vitković, N. (2023). Optimization of Cutting Parameters for Minimizing Unit Production Time in Multi-Pass Rough Turning of S355JR Structural Steel. The 16th International Conference on Accomplishments in Mechanical and Industrial Engineering (DEMI 2023). Republika Srpska, Banja Luka: Mašinski fakultet.

  
  

  Randjelovic, S., Miladinovic, T., Mladenovic, S., Blagojevic, V., Vitkovic, N., Jankovic, P., & Kostic, N. (2023). Nonlinear FEM Simulation of Forging Process. The Sixth International Conference “Mechanical Engineering in the 21st Century – MASING 2023”. Niš: Mašinski fakultet.

  
  

  Arandjelovic, J., Vitkovic, N., & Korunovic, N. (2023). A Methodology for Personalization of Humerus Shaft Plate. 3RD INTERNATIONAL CONFERENCE ON KEY ENABLING TECHNOLOGIES (KEYTECH 2023).

  
  

  Trifunović, M. B., Madić, M. J., & Vitković Nikola, . (2021). Cutting parameters optimization for minimizing energy consumption in multi-pass turning of grey cast iron. proceedings of the 14th international scientific conference mma 2021 - flexible technologies. faculty of technical sciences, department of production engineering, 21000 novi sad, Trg Dositeja Obradovića 6, SERBIA.

  
  

  Tomić, M. M., Vitković, N. M., Miloš, S. B., & Milošević, M. S. (2021). Precise Speed Estimation of the Physically Connected off-Road - Robotized Vehicles by Using Artificial Intelligence Methods. Proceedings of the XV International Conference on Systems,  Automatic Control and Measurements  - SAUM 2021 -. Faculty of Electronic Engineering - Niš Faculty of Mechanical Engineering - Niš SAUM - Association of Serbia for Systems, Automatic Control and Measurements - Belgrade, Nis.

  
  

  Barać, M., Vitković, N., & Manić, M. T. (2021). Conceptual model of an information system for measuring cutting fluid temperature on CNC machines. Zbornik Radova - 38. Savetovanje Proizvodnog Mašinstva Srbije, SPMS 2021 - = 38th International Conference of Production Engineering, ICPE-S 2021, 14-15. October 2021, ČAčak, Serbia. Čačak : University of Kragujevac, Faculty of Technical Sciences.

  
  

  Trifunovic Milan, , Madic Milos, , & Vitković, N. M. (2021). CUTTING PARAMETERS OPTIMIZATION FOR MINIMIZING ENERGY - CONSUMPTION IN MULTI-PASS TURNING OF GREY CAST IRON. Proceedings / 14th International Scientific Conference MMA 2021. FACULTY OF TECHNICAL SCIENCES  DEPARTMENT OF PRODUCTION ENGINEERING 21000 NOVI SAD, Trg Dositeja Obradovića 6 SERBIA.

  
  

  Vladimir Mitrović, , Mišić, D. T., Miroslav Trajanović, , & Nikola Vitković, . (2021). Comparison of five outlier detection methods in case of OpenClick data set. ICIST 2021 Proceedings,.

  
  

  Dragan Mišić, Miroslav Trajanović, Nikola Korunović, Nikola Vitković, Assessment of Human Neuromuscular System State Using Standard Human-Computer Interaction, ICIST 2020 Proceedings Vol.1, ICIST 2020 Proceedings Vol.1, 978-86-85525-24-7, Kopaonik, 8. - 11. Mar, 2020

  
  

  Milica Barać, Nikola Vitković, Miodrag Manić, Marko Perić, A Review of Cutting Fluids in Manufacturing Engineering and Environmental Impact, Proceedings of The Fifth International Conference – MASING 2020, Proceedings of The Fifth International Conference – MASING 2020, pp. 287 - 291, 978-86-6055-139-1, Niš, 9. - 10. Dec, 2020

  
  

  Vitković Nikola, Mišić Dragan, Simonović Miloš, Banić Milan, Miltenović Aleksandar, Mitić Jelena, Milovanović Jelena, Novel Educational Methodology for Personalized Massive Open Online Courses, ICIST 2020 Proceedings, ICIST 2020 Proceedings, 1, pp. 5 - 9, 978-86-85525-24-7, Kopaonik, 8. - 11. Mar, 2020

  
  

  Mitić Jelena, Vitković Nikola, Manić Miodrag, Trajanović Miroslav, Reconstruction of the missing part in the human mandible, ICIST 2020 Proceedings, ICIST 2020 Proceedings, 1, pp. 202 - 205, 978-86-85525-24-7, Kopaonik, 8. - 11. Mar, 2020

  
  

  Mitić Jelena, Vitković Nikola, Manić Miodrag, Trajanović Miroslav, Application of Artificial Neural Networks in Prediction of Human Mandible Geometry, ICIST 2019 Proceedings, ICIST 2019 Proceedings, 1, pp. 213 - 216, 978-86-85525-24-7, 2019.

  
  

  Milos Stojkovic, Miroslav Trajanovic, Nikola Vitkovic, Personalized Orthopedic Surgery Design Challenge: Human Bone Redesign Method, 8TH INTERNATIONAL CONFERENCE ON DIGITAL ENTERPRISE TECHNOLOGY - DET 2014 DISRUPTIVE INNOVATION IN MANUFACTURING ENGINEERING TOWARDS THE 4TH INDUSTRIAL REVOLUTION, 84, pp. 701 - 706, 2212-8271, 10.1016/j.procir.2019.04.170, 2019.

  
  

  Misic Dragan, Zdravkovic Milan M, Vitkovic Nikola, Mitkovic Milan M, MItkovic Milorad, Real-Time Monitoring of Bone Fracture Recovery by Using Aware, Sensing, Smart, and Active Orthopedic Devices, IEEE Internet of Things Journal, 5, 6, pp. 4466 - 4473, 2327-4662, 10.1109/JIOT.2018.2819623, 2018.

  
  

  Nikola Vitković, Miloš Simonović, Aleksandar Miltenović, Milan Trifunović, SOFTWARE MODULE FOR THE VISUALIZATION AND PLANNING OF MARSHALLING YARD OPERATIONS, ZELKON PROCEEDINGS 2018, ZELKON PROCEEDINGS 2018, pp. 213 - 216, 978-86-6055-105-6, Nis, 11. - 12. Oct, 2018

  
  

  Nikola Vitković, Miloš Stojković, Miroslav Trajanović, Jelena Milovanović, Milan Trifunović, Miodrag Manić, Jelena Mitić, Stojanka Arsić, Karim Husain, Personalized 3D Model of Bone Scaffold Created by Application of Method of Anatomical Features, The 4 th INTERNATIONAL CONFERENCE MECHANICAL ENGINEERING IN XXI CENTURY, MASING 2018, pp. 305 - 308, 978-86-6055-103-2, Nis, 19. - 20. Apr, 2018

  
  

  Karim N. Husain, Miloš Stojković, Mohammed M. Rashid, Nikola Vitković, Miodrag Manić, Jelena Milovanović, Nikola Korunović, Digital Reconstruction of Large Missing Part of Mandible by Anatomically Shaped Scaffold, The 4th International Conference Mechanical Engineering in XXI Century, The 4th International Conference Mechanical Engineering in XXI Century, pp. 317 - 320, 978-86-6055-103-2, Niš, 19. - 20. Apr, 2018

  
  

  Zdravković Milan, Vitković Nikola, Trajanović Miroslav, Trifunović Milan, Korunović Nikola, Model-based, client-side integration of heterogeneous data from REST services, ICIST 2018 Proceedings, ICIST 2018 Proceedings, 2, pp. 278 - 281, 978-86-85525-22-3, Belgrade, 2018.

  
  

  J. Mitić, N. Vitković, M. Manić, M. Trajanović, D. Mišić, Personalized anatomically adjusted plate for fixation of human mandible condyle process, 7th International Conference on Information Society and Technology, ICIST 2017, 7th International Conference on Information Society and Technology, ICIST 2017, pp. 288 - 292, 978-86-85525-19-3, Kopaonik, Serbia, 12. - 15. Mar, 2017

  
  

  J. Mitić, M. Madić, N. Vitković, M. Manić, M. Trajanović, Optimal selection of Morphometric Parameters for the Creation of Parametric Model of the Human Mandible Coronoid Process, 4th South-East European Conference on Computational Mechanics, SEECCM 2017, 4th South-East European Conference on Computational Mechanics, SEECCM 2017, pp. 19 - 19, 978-86-921243-0-3, Kragujevac, Serbia, 3. - 4. Jul, 2017

  
  

  Milan Zdravković, Nikola Korunović, Nikola Vitković, Miroslav Trajanović, Jelena Milovanović, R. Jardim-Goncalves, J. Sarraipa, Towards the Internet-of-Things platform for orthopaedics surgery – the smart external fixation device case studies, 8th International Conference - Interoperability for Enterprise Systems and Applications (I-ESA 2016). Workshop B4: Sensing Enterprise: Opportunities and Barriers, 8th International Conference - Interoperability for Enterprise Systems and Applications (I-ESA 2016). Workshop B4: Sensing Enterprise: Opportunities and Barriers, pp. 215 - 222, 978-18-47040-44-2, Portugal, 29. Mar - 01. Apr, 2016

  
  

  Milan Zdravković, Nikola Vitković, Miroslav Trajanović, R. Jardim-Goncalves, Concept of the formal model driven Internet-of-Things platform, 8th International Conference - Interoperability for Enterprise Systems and Applications (I-ESA 2016). Workshop B4: Sensing Enterprise: Opportunities and Barriers, 8th International Conference - Interoperability for Enterprise Systems and Applications (I-ESA 2016). Workshop B4: Sensing Enterprise: Opportunities and Barriers, pp. 208 - 214, 978-18-47040-44-2, Portugal, 29. Mar - 01. Apr, 2016

  
  

  Nikola Vitkovic, Mohammed Rashid, Miroslav Trajanovic, Miodrag Manic, Jelena Milovanovic, Dragan Misic, Stojanka Arsic, Model-Based System for the creation and application of modified cloverleaf plate fixator ,Proceedings of the ICIST 2015, 5th International Conference on Information Society and Technology, Kopaonik, Serbia, pp. 22-26 

  
  

  Rashid, М., Husain, K., Vitković, N., Manić, M., Trajanović, M., Milovanović, J.,  Radović, Lj., Reverse Modeling of Human Humerus by The Method Of Anatomical Features (MAF) International Working Conference Total Quality Management – Advanced and Intelligent Approaches, Belgrade, Serbia, 2 – 5 June, 2015.

  
  

  Nikola Vitković, Miodrag Manić, Miroslav Trajanović, Miloš Stojković, Dragan Mišić, Miloš Madić and Stojanka Arsić, Geometrically defined cloud of anatomical points of human femur trochanteric and neck region, ICT Forum 2014, ICT Conference 2014, Niš, Serbia, pp. 126-129 

  
  

  Stojanka Arsić, Miroslav Trajanovic, Miodrag Manic, Nikola Vitkovic and Milos Stojanovic, Morphological properties of the hand bones important for their 3D geometrical modeling, ICT Forum 2014, ICT Conference 2014, Niš, Serbia, pp.130-135

  
  

  Miodrag Manic, Jelena Milovanovic, Nikola Vitkovic, Miroslav Trajanovic and Zoran Stamenkovic, Bio-Form and Complex Configuration Elements Designing and Their Production with Additive Technologies, ICT Forum 2014, ICT Conference 2014, Niš, Serbia, pp. 136-140

  
  

  Miloš Madić, Nikola Vitković and Milan Trifunović, Application of the WASPAS Method for Software Selection, ICT Forum 2014, ICT Conference 2014, Niš, Serbia, pp.115-119 

  
  

  Dragan Mišić, Miloš Stojković, Nikola Vitković, Miroslav Trajanović, Miodrag Manić, Nikola Korunović, Jelena Milovanović, The concept of the information system for managing business processes of designing and manufacturing of osteofixation material, Proceedings of 4th International Conference on Information Society and Technology, ICIST 2014 - Kopaonik, Society for Information Systems and Computer Networks, Belgrade, 2014., pp 10-15

  
  

  Ranđelović S, Mišić D, Trajanović M, Vitković N, Veselinović M, Customization of orthopedic internal fixator, Acta technica corviniensis – Bulletin of Engineering, pp 71-74   Tome VI (2013), Fascicule 2,   Izdavac: University Politehnica Timisoara, Faculty of Engineering Hunedoara, Romania

  
  

  Nikola Vitković, Miodrag Manić, Miroslav Trajanović, Dragan Mišić, Milorad Mitković, Tanja Arh, Pipan Matić, E-learning system for medical education based on the geometrical models of human bones and fixators, Proceedings of the 4th International conference on e-Learning, Belgrade, 2013, pp 10-14

  
  

  Nikola D. Korunovic, Miroslav D. Trajanovic, Dalibor M. Stevanovic, Nikola M. Vitkovic, Milos S. Stojkovic, Jelena R. Milovanovic, Dragana S. Ilic, Material characterization issues in FEA of long bones, SEECCM III,   3rd South-East European Conference on Computational Mechanics-an ECCOMAS and IACM Special Interest Conference, M. Papadrakakis, M. Kojic, I. Tuncer (eds.), Kos Island, Greece, 12–14 June 2013

  
  

  Milos S. Stojkovic, Nikola D. Korunovic, Miroslav D. Trajanovic, Jelena R. Milovanovic, Milan B. Trifunovic, Nikola M. Vitkovic, Design study of anatomically shaped lattice scaffolds for the bone tissue recovery, SEECCM III,   3rd South-East European Conference on Computational Mechanics-an ECCOMAS and IACM Special Interest Conference, M. Papadrakakis, M. Kojic, I. Tuncer (eds.), Kos Island, Greece, 12–14 June 2013

  
  

  Dalibor M. Stevanović, Nikola M. Vitković, Marko M. Veselinović, Miroslav D. Trajanović, Miodrag T. Manić, Milorad B. Mitković, Parametrization of internal fixator by Mitkovic, International Working Conference ’’Total Quality Management – Advanced and Intelligent Approaches’’,   4th – 7th June, 2013.,  Belgrade, Serbia, pp 541-544

  
  

  Vitković, N., Veselinović, M.,  Mišić, D., Manić, M., Trajanović, M., Mitković, M. (2012).  Geometrical models of human bones and implants, and their usage in application for preoperative planning in orthopedics, Proceedings of 11th international scientific conference, MMA 2012, Novi Sad, Serbia, pp. 535 - 538, 2012

  
  

  Trajanovic M., Tufegdzic M., Arsic S., Veselinovic M., Vitkovic N., Reverse engineering of the human fibula, Proceedings of 11th international scientific conference, MMA 2012, Novi Sad, Serbia, pp. 527-530, 2012

  
  

  Veselinović M, Vitković N, Stevanović D, Trajanović M, Arsić S, Milovanović J, Stojković M, Study on Creating Human Tibia Geometrical Models, Proceedings of E-Health and Bioengineering Conference, EHB 2011, art. no. 6150345, pp. 195-198, 2011

  
  

  Korunović N., Trajanović M., Stojković M., Vitković N., Trifunović M., Milovanović J., Tire tread modeling for fea, Proceedings of the 34th International conference on production engineering, ICPE 2011, Niš, Serbia, pp. 209-212, 2011

  
  

  Vitković N., Milovanović J., Trajanović M.,  Korunović N., Stojković M.,, Manić M., Methods for creating geometrical model of femur anatomical axis, Proceedings of the 34th International conference on production engineering, ICPE 2011, Niš, Serbia, pp. 351-354, 2011

  
  

  Mišić, D., Vitković, N., Stojković, M., Trajanović, M.,  Zdravković, M., (2011). Resources management in workflow management systems, Proceedings of 34th International conference on production engineering, ICPE 2011, Niš, Serbia, 243-247

  
  

  Stojković M., Manić M., Trifunović M., Vitković N., Semantic interpretation of the product model features in product quality assessment, Proceedings of 6^th International Working Conference - Total Quality Management – Advanced and Intelligent Approaches, IWC TQM 2011, June 6th – 10th, Belgrade, Serbia, pp. 482-485, 2011

  
  

  Vitković N., Trajanović M., Milovanović J., Korunović N., Arsić S., Ilić D., The geometrical models of the human femur and its usage in application for preoperative planning in orthopedics, ICIST 2011, March 7th – 8th, Kopaonik, Serbia, pp. 13-17, 2011

  
  

  Korunović N, Trajanović M., Milovanović J., Stojković M., Vitković N., Bone modelling for structural analysis using FEM, Proceedings - International conference Mechanical Engineering in XXI Century,  MASING 2010, Niš, Serbia, pp. 205-209, 2010

  
  

  Trajanovic M., Vitkovic N., Stojkovic M., Manic M., Arsic S., The morphological approach to geometrical modelling of the distal femur, SEECCM 2009, 2nd South-East European Conference on Computational Mechanics, Rhodes, Greece, SE191, 2009

  
  

  M. Stojkovic, M. Trajanovic, N. Vitkovic, J. Milovanovic, Referential Geometrical Entities for Reverse Modeling of Geometry of Femur, Computational Vision and Medical Image Processing – VipIMАGE. Porto, Portugal CRC Press / Balkema, Taylor & Francis Group, Porto, Portugal,  pp. 189-195, 2009

• Radovi na domaćim naučnim skupovima:

  Korunović, N, Trifunović, M, Vitković, N, Milovanović, J,  Trajanović, M, (2014( Non-linear cord material models in finite element analysis of tires, PneUMAtici 2014 VIII naučna konferencija PneUMAtici 2014, 12.-13. decembar 2014. Beograd, 27-42.

  
  

  Trajanović М., Vitković Н., Trifunović М., Аrsić S., Novi pristup u generisanju interpolacionih  površina fizičkih objekata, Zbornik radova YUinfo 2009, Kopaonik 2009.

  
  

   

• Patenti:

  Dušan Krstić, Milan Banić, Ivan Simonović, Miloš Simonović, Drago Samardžić, Aleksandar Miltenović, Miša Tomić, Vukašin Pavlović, Nikola Vitković, Nikola Korunović, Vlastimir Nikolić, Ivana Samardžić Simić, Slavica Slavić, Samohodni sistem za čuvanje i teranje stada na ispašu, 2020. (Пријава патента)